Xtol

I took this yesterday evening. The sun was catching the leaves in the Aspens whose leave had turned a wonderful bright yellow. Unfortunately there's a bit of what looks like (I hope¹) lens flare in the top of the trees on the right. I should have had a lens hood, but I have to figure something out when I've got the Cokin filters on the front of the lens (which is all the time).   

The pic was taken at about 4pm and developed by 5:15; by 7:30 it was scanned and spotted. Not only is this a bit more fun than waiting three weeks for Fuji to return the film (which they no longer do), but I like the results better. There is less grain, particularly in the sky. Since the film still Fuji Acros Neopan 100, the difference must be the developer (Xtol).

I will probably also try Eco-Pro which is supposed to be the same formulation.

¹ Because if it isn't lens flare it's a developing problem; and I'd rather it wasn't.

Home darkroom #3

My third darkroom is much like the second, but smaller. Certainly not enough room for the enlarger, but just about enough to mix the chemicals and shake the tank. There've been several "innovations" since the last time I developed any film. First, I now have a handy calculator to match time to temperature, film, and dilution. It makes the assumption that the relationship between temperature and time is a function of activation energy for whatever reaction is going on and that a log function is a reasonable approximation of the number of molecules with sufficient energy to take part int he reaction. The real answer involves integrating the area under a Boltzman distribution which I haven't yet been able to do. A quick look at the three films I just developed suggests it works.

The second innovation is not storing mixed developer. It's going to be easier to keep (I think) in power form, and mix only as much as I need just before processing the film. In order to do this I bought a jewellers scale.

Proper laboratory grade chemical balances start at about $850 for the most basic unit. Instead I found the little scale in the picture above for about $12, which was advertised as being accurate to one hundredth of a gram!  Just to make sure, I also bought two calibration weights and, astonishingly, the advertised spec was accurate (error < 0.01g).        

Another novelty are the measuring jugs - I was about to buy some Paterson measuring cylinders or similar, when I found these plastic measuring jugs at the Dollar Store. They are perfectly adequate for gauging the 12 fluid ounces the tank takes.       

The last innovation is Xtol, which according to Kodak delivers the second finest grain, the second most shadow detail and the highest actuance of all Kodak's developers. This looks like an unbeatable combination, and if it lives up to Kodak's marketing material, this will be my developer of choice. (I used to use D-76 which has been Kodak's workhorse developed for more than half a century. Xtol is apparently Kodak's latest - and its last - innovation in black and white film processing. 

The films is currently hanging up to dry. Apart from a few snafus (the clip covered some of the last frame, the first film was kinked and has a spot where the developed seems not to have reached the film),  not bad for my first film in over 10 years and my first roll of 6x7.

The next post, once the film is dry will report the results. Stay tuned.            

Replacing Walmart

Since the demise of the Fuji-Walmart service, I've been looking for another solution. I've found a small lab in San Jose near the university that will do both C41 and black and white. My first roll of color is ready tomorrow.  I've decided to go back to developing my own black and white. Tuolumne county runs a hazardous waster disposal program so I need to be able store the spent chemical for 3 to 4 months; but I think that's doable.  

End of the road

Got some disappointing news this afternoon. Fuji Labs, (to which WalMart sends 'odd' film like B&W 120) has discontinued its develop only service. The will still develop 120 but won't return the negs, which is completely pointless. So my cost per roll has suddenly gone from $2.33 to over $10. At $1 a frame I'm going to have to think twice about pressing the shutter; and digital is looking increasingly attractive...

So this excursion into medium format, which I had foolishly thought was going to be my preferred compromise between 35mm/digital and 4x5 for the foreseeable future, may well have come to a rather sudden end.

Now I have to decide whether to sell my Mamiya equipment or keep it for its (short-lived) nostalgia value.    

Good glass

I was wondering today whether it was worth spending lots of money on good lenses. I know that's the conventional wisdom, but I've gotten on fine not buying DeWalt tools for the workshop, so why buy a Rolls Royce of a lens? Is it overkill?

A moment's reflection suggested not. I really don't notice having good glass. But I did with my little digital - a Nikon Coolpix S2200 which got very fuzzy in the corners. And my epiphany was this; it's not noticing that is the hallmark of quality glass. If the glass were poor, as it is on the Coolpix, I would (and indeed did) notice, and not noticing is a testament to a good lens. It's one less thing to get in the way.   

Counter-intuitive

I had settled on scanning my negatives at 2400 dpi because, starting at lower resolutions and working upwards, that was where the grain became noticeable. Any higher resolution, I reasoned, would only make the grains larger and not reveal any more detail. I was wrong.

There seems to be an 'interaction' between the scan resolution and the grain size when the two are close which actually produces a more pronounced appearance of graininess. At higher resolutions, though the grain is still visible, it is less distracting.  Here are some examples:

2400 dpi

3200 dpi

4800 dpi

6400 dpi

9600 dpi

Surprisingly, the least grainy in appearance is the last scan at 9600 dpi (which is a shame since it takes between 7 and 8 minutes per negative at this resolution).  So it looks like I'll just have to learn to be patient.        

Finding Gamma

Really, this is a note to remind me that, based on my empirical testing, for low values of gamma, the gamma value at the scanner and the gamma value in GIMP are additive, and sum to about 3.2. (This puts Zone 5 at a digital (linear) value of 127 out of 255.

There's probably a mathematical proof of this, but I'm not going to try to derive the result. Suffice it to say that I will now start using scans with a gamma of root 2 and then add 1.8 in GIMP. This is just a mnemonic device; root 2 is common and 1.8 is the typical display gamma.

Neither value has any substantive significance here. However, given the odd things the Epson software does with the tone curve and the top and the tow, I decided not ti use a gamma over 1.5 at the scanner. I also don't want to have GIMP to all the rescaling since I think this is best done at nearest the source in the hope that it's achieved in the AD converter, and not afterwards.